-
The Principle of Using Root Nano Bead Mill?? ??
In the process of use, if the temperature of the nano sand mill is too high or the pressure is too high, it should be checked to see if the discharge screen of the sand mill is blocked or not, it should be shut down for inspection immediately, and it should not be forced to start. -
Precautions For the Use of Three-roll Mill?? ??
The three-roll mill has been used continuously for more than half a year. It is best to do a thorough inspection and overhaul the parts. The following are the precautions when using it. The sand mill manufacturer will take everyone to take a look. ● Pay attention to the bearing temperature at both ends of the roller, generally not more than 100. ● Before operation, first check the power cord, whether the switch button is normal, whether there is cooling circulating water, and only start it if everything is normal. ● Pay attention to whether there is any abnormality during operation, and stop immediately. -
Analysis on the Consumption of Grinding Media in Horizontal ?? ??
The horizontal bead mill must be used together with the grinding media to achieve excellent grinding results. Regarding the grinding media, in addition to its own performance, the control of the amount is also very important. If the grinding medium is used too much, it will not be conducive to the performance of the horizontal bead mill and reduce its grinding and dispersion effect. The following is an analysis of the usage rule of grinding media in the horizontal bead mill. -
Methods to Improve Material Quality in Actual Production and?? ??
Our ultimate goal of using sand mills is to grind more ideal materials. Pay attention to the following factors that affect the quality of the materials: the speed of the sand mill, the feeding speed of the material pump, the filling amount of the grinding beads, and the grinding The particle size of the beads affects the fineness of the product. Today, I will talk to you about the methods of improving the quality of materials in actual production and experiments. -
Points to Note When Choosing a Sand Mill in the Coating Indu?? ??
Coatings are divided into solid coatings and liquid coatings. Liquid coatings. It has a wide range of applications and a wide range of applications. The requirements for use will become higher. In order to meet the grinding requirements, sand mills and nano sand The mill rises. -
Problems that Should be Paid Attention to When Using Horizon?? ??
When using a horizontal sand mill, it is necessary to grasp the performance of each grind tool, that is, to understand the "temper" of the grind tool. For example, some grind tools are suitable for white corundum grinding powder with an inlay of W3.5 , And some grinding tools are suitable for inserting white corundum grinding powder with a particle size of W1.5. Some grind tools can be used for manual grinding, and some are suitable for mechanical grinding. Some grind tools have good performance (such as uniform sanding), and some grind tools have excellent performance. Only on the basis of knowing the "temper" of each grind tool, can we make full and reasonable selection and use of each grind tool. -
The Scope of Application of Root Nano Bead Mill in the Coati?? ??
The application of nano sand mills in the field of coatings is very important, and it is very useful for coating processing technology. The nano-level fineness allows the coating industry to be more effectively applied to various industries and fields, and it has also improved in chemical coatings. The ideal solution.Anticorrosive coating: Anti-corrosion coatings mainly include metal structure anti-corrosion coatings, marine facilities anti-corrosion and ship and container coatings. With its growth potential, my countrys anticorrosive coatings market has become a market where world-renowned coating companies compete. -
Method of Maintaining Horizontal Sand Mill?? ??
Maintenance method: When the machine is running, check the circulation of the cooling lubricant through the sight glass, and use the cooling liquid that is compatible with the material. Check whether the pressure in the grinding chamber is too large. When the pressure exceeds the set detection value, it will automatically protect. Check whether the mechanical seal pressure is too large. -
Summary of Application Research of Bead Mill in the Field of?? ??
In the preparation process of special ceramics, wet grinding is a more effective method to obtain nano-ceramic powders. It not only avoids the high cost of preparing nano-powders by chemical methods, but also achieves energy saving and emission reduction, and also avoids some traditional methods. The fineness of mechanical grinding is difficult to reach the deficiency of nanometer powder. -
The Damage of Mechanical Seal of Sand Mill and its Treatment?? ??
I believe that many customers and friends who have used sand mills have encountered mechanical seal damage in the process of using the machine. The mechanical seal damage is actually caused by a variety of different reasons. The following summarizes Kind of easy causes of mechanical seal damage and corresponding solutions. -
Superior Performance of Nano Sand Mill?? ??
Superior performance of nano sand mill: 1. High energy ratio: The new rod-pin grinding rotor, concentrated kinetic energy gives the largest energy ratio to the grinding beads. Improve the grinding efficiency and the degree of refinement, while reducing the resistance of the material in the grinding cavity, which is more suitable for materials with medium and high viscosity ultra-fine requirements. 2. Efficient aspect ratio: High-efficiency length-to-diameter ratio design barrel, source for structure, staggered rod and nail arrangement lengthens the effective time of the material in the mill. 3. Large area discharge method: -
Root Sand Mill Design Advantage (3)?? ??
Sand mill parts manufacturing technology and precision and other design makes the sand mill more stable and also easy for after-sale service maintenance. -
Pesticide SC--How to realize production rate 5MT/8Hrs with ?? ??
Also based on the production data of customer site, for Tebuconazole and Chlorothalonil SC: 700L/Hr, finish size D90＜5micron. So for 5000L material, by 7 hours you can finish. So based on experiment and production data, to fulfill your requirements of production rate 5MT/8Hrs, the most sufficient selection of sand mill models are RTSM-50AD and RTSM-100AJ in series grinding. Rotation speed around 35Hz and temperature can be controlled under 40 degree. Cooling water temperature under 10degree. -
Root Sand Mill Design Advantage (3)?? ??
The reasonable design and high quality of each part has make Root sand mill more stable and durable even after long time working. The mechanical seal which Root uses is assembly type double end mechanical seal which can bear higher pressure and ensure no leaking of material. Differet protection point for the mill has made a perfect safety protection system. -
Root Sand Mill Design Advantage (2)?? ??
Root sand mill main shaft and key parts tolerance H6 and roughness R0.8 or R1.6. The key parts must handled by grinder treat required precision. For parts which directly contact cooling water, we use either stainless steel or carbon steel coated with color zinc or black zinc to avoid the effect on cooling effect due to rust and scale generated after long-time using. -
Root Sand Mill Design Advantage (1)?? ??
Compared with many traditional Chinese sand mill manufacturer, Root sand mill is based on excellent mechanical design to ensure equipment stability, hydrodynamic theory to ensure a good and sufficient grinding for material with different viscosity and hardness by adjusting the linear speed and zirconia beads sizes etc
